Near-field communication

src: cdn.mos.cms.futurecdn.net

Near-field communication (NFC) is a set of communication protocols that enable two electronic devices, one of which is usually a portable device such as a smartphone, to establish communication by bringing them within 4 cm (1.6 in) of each other.

NFC devices are used in contactless payment systems, similar to those used in credit cards and electronic ticket smartcards and allow mobile payment to replace/supplement these systems. This is sometimes referred to as NFC/CTLS (Contactless) or CTLS NFC. NFC is used for social networking, for sharing contacts, photos, videos or files. NFC-enabled devices can act as electronic identity documents and keycards. NFC offers a low-speed connection with simple setup that can be used to bootstrap more capable wireless connections.

Video Near-field communication

Overview

Similar ideas in advertising and industrial applications were not generally successful commercially, outpaced by technologies such as barcodes and UHF RFID tags. NFC protocols established a generally supported standard. When one of the connected devices has Internet connectivity, the other can exchange data with online services.

NFC-enabled portable devices can be provided with application software, for example to read electronic tags or make payments when connected to an NFC-compliant apparatus. Earlier close-range communication used technology that was proprietary to the manufacturer, for applications such as stock ticket, access control and payment readers.

Like other "proximity card" technologies, NFC employs electromagnetic induction between two loop antennas when NFC-enabled devices--for example a smartphone and a printer--exchange information, operating within the globally available unlicensed radio frequency ISM band of 13.56 MHz on ISO/IEC 18000-3 air interface at rates ranging from 106 to 424 kbit/s.

Each full NFC device can work in three modes:

• NFC card emulation--enables NFC-enabled devices such as smartphones to act like smart cards, allowing users to perform transactions such as payment or ticketing.
• NFC reader/writer--enables NFC-enabled devices to read information stored on inexpensive NFC tags embedded in labels or smart posters.
• NFC peer-to-peer--enables two NFC-enabled devices to communicate with each other to exchange information in an adhoc fashion.

NFC tags are passive data stores which can be read, and under some circumstances written to, by an NFC device. They typically contain data (as of 2015 between 96 and 8,192 bytes) and are read-only in normal use, but may be rewritable. Applications include secure personal data storage (e.g. debit or credit card information, loyalty program data, personal identification numbers (PINs), contacts). NFC tags can be custom-encoded by their manufacturers or use the industry specifications.

The standards were provided by the NFC Forum. The forum was responsible for promoting the technology and setting standards and certifies device compliance. Secure communications are available by applying encryption algorithms as is done for credit cards and if they fit the criteria for being considered a personal area network.

NFC standards cover communications protocols and data exchange formats and are based on existing radio-frequency identification (RFID) standards including ISO/IEC 14443 and FeliCa. The standards include ISO/IEC 18092 and those defined by the NFC Forum. In addition to the NFC Forum, the GSMA group defined a platform for the deployment of GSMA NFC Standards within mobile handsets. GSMA's efforts include Trusted Services Manager, Single Wire Protocol, testing/certification and secure element.

A patent licensing program for NFC is under deployment by France Brevets, a patent fund created in 2011. This program was under development by Via Licensing Corporation, an independent subsidiary of Dolby Laboratories, and was terminated in May 2012. A platform-independent free and open source NFC library, libnfc, is available under the GNU Lesser General Public License.

Present and anticipated applications include contactless transactions, data exchange and simplified setup of more complex communications such as Wi-Fi.

Maps Near-field communication

History

NFC is rooted in radio-frequency identification technology (known as RFID) which allows compatible hardware to both supply power to and communicate with an otherwise unpowered and passive electronic tag using radio waves. This is used for identification, authentication and tracking.

• 1983 The first patent to be associated with the abbreviation "RFID" was granted to Charles Walton.
• 1997 Early form patented and first used in Star Wars character toys for Hasbro. The patent was originally held by Andrew White and Marc Borrett at Innovision Research and Technology (Patent WO9723060). The device allowed data communication between two units in close proximity.
• 2002 Sony and Philips agreed to establish a technology specification and created a technical outline on March 25, 2002.
• 2003 NFC was approved as an ISO/IEC standard on December 8, and later as an ECMA standard.
• 2004 Nokia, Philips and Sony established the NFC Forum
• 2006 Initial specifications for NFC Tags
• 2006 Specification for "SmartPoster" records
• 2007 Innovision's NFC tags used in the first consumer trial in the UK, in the Nokia 6131 handset.
• 2009 In January, NFC Forum released Peer-to-Peer standards to transfer contacts, URLs, initiate Bluetooth, etc.
• 2010 Innovision released a suite of designs and patents for low cost, mass-market mobile phones and other devices.
• 2010 Samsung Nexus S: First Android NFC phone shown
• 2010 Nice, France launches the "Nice City of contactless mobile" project, providing inhabitants with NFC mobile phones and bank cards, and a "bouquet of services" covering transportation, tourism and student's services
• 2011 Tapit Media launches in Sydney, Australia as the first specialized NFC marketing company
• 2011 Google I/O "How to NFC" demonstrates NFC to initiate a game and to share a contact, URL, app or video.
• 2011 NFC support becomes part of the Symbian mobile operating system with the release of Symbian Anna version.
• 2011 Research In Motion devices are the first ones certified by MasterCard Worldwide for their PayPass service
• 2012 UK restaurant chain EAT. and Everything Everywhere (Orange Mobile Network Operator), partner on the UK's first nationwide NFC-enabled smartposter campaign. A specially created mobile phone app is triggered when the NFC-enabled mobile phone comes into contact with the smartposter.
• 2012 Sony introduced NFC "Smart Tags" to change modes and profiles on a Sony smartphone at close range, included with the Sony Xperia P Smartphone released the same year.
• 2013 Samsung and VISA announce their partnership to develop mobile payments.
• 2013 IBM scientists, in an effort to curb fraud and security breaches, develop an NFC-based mobile authentication security technology. This technology works on similar principles to dual-factor authentication security.
• 2014 AT&T, Verizon and T-Mobile released Softcard (formally ISIS mobile wallet). It runs on NFC-enabled Android phones and iPhone 4 and iPhone 5 when an external NFC case is attached. The technology was purchased by Google and the service ended on March 31, 2015.
• 2014 Apple introduced Apple Pay for NFC-enabled mobile payment on iPhone 6 and 6 Plus, and the Apple Watch, which was released on April 24, 2015.
• In November 2015, Swatch and Visa Inc. announced a partnership to enable NFC financial transactions using the "Swatch Bellamy" wristwatch. The system is currently online in Asia thanks to a partnership with China UnionPay and Bank of Communications. The partnership will bring the technology to the US, Brazil, and Switzerland.
• November 2015, Google's Android Pay function was launched, a direct rival to Apple Pay, and it started rolling out across the US.

src: www.southmainmemphis.net

Design

NFC is a set of short-range wireless technologies, typically requiring a separation of 10 cm or less. NFC operates at 13.56 MHz on ISO/IEC 18000-3 air interface and at rates ranging from 106 kbit/s to 424 kbit/s. NFC always involves an initiator and a target; the initiator actively generates an RF field that can power a passive target. This enables NFC targets to take very simple form factors such as unpowered tags, stickers, key fobs, or cards. NFC peer-to-peer communication is possible, provided both devices are powered.

NFC tags contain data and are typically read-only, but may be writeable. They can be custom-encoded by their manufacturers or use NFC Forum specifications. The tags can securely store personal data such as debit and credit card information, loyalty program data, PINs and networking contacts, among other information. The NFC Forum defines four types of tags that provide different communication speeds and capabilities in terms of configurability, memory, security, data retention and write endurance. Tags currently offer between 96 and 4,096 bytes of memory.

As with proximity card technology, near-field communication uses electromagnetic induction between two loop antennas located within each other's near field, effectively forming an air-core transformer. It operates within the globally available and unlicensed radio frequency ISM band of 13.56 MHz. Most of the RF energy is concentrated in the allowed ±7 kHz bandwidth range, but the spectral mask for the main lobe is as wide as 1.8 MHz.

Theoretical working distance with compact standard antennas: up to 20 cm (practical working distance of about 10 cm).

Supported data rates: 106, 212 or 424 kbit/s (the bit rate 848 kbit/s is not compliant with the standard ISO/IEC 18092)

The two modes are:

• Passive--The initiator device provides a carrier field and the target device answers by modulating the existing field. In this mode, the target device may draw its operating power from the initiator-provided electromagnetic field, thus making the target device a transponder.
• Active--Both initiator and target device communicate by alternately generating their own fields. A device deactivates its RF field while it is waiting for data. In this mode, both devices typically have power supplies.

NFC employs two different codings to transfer data. If an active device transfers data at 106 kbit/s, a modified Miller coding with 100% modulation is used. In all other cases Manchester coding is used with a modulation ratio of 10%.

NFC devices are full-duplex--they are able to receive and transmit data at the same time. Thus, they can check for potential collisions if the received signal frequency does not match the transmitted signal's frequency.

Although the range of NFC is limited to a few centimeters, plain NFC does not ensure secure communications. In 2006, Ernst Haselsteiner and Klemens Breitfuß described possible attacks and detailed how to leverage NFC's resistance to man-in-the-middle attacks to establish a specific key. As this technique is not part of the ISO standard, NFC offers no protection against eavesdropping and can be vulnerable to data modifications. Applications may use higher-layer cryptographic protocols (e.g. SSL) to establish a secure channel.

The RF signal for the wireless data transfer can be picked up with antennas. The distance from which an attacker is able to eavesdrop the RF signal depends on multiple parameters, but is typically less than 10 meters. Also, eavesdropping is highly affected by the communication mode. A passive device that doesn't generate its own RF field is much harder to eavesdrop on than an active device. An attacker can typically eavesdrop within 10 m and 1 m for active devices and passive devices, respectively.

Because NFC devices usually include ISO/IEC 14443 protocols, relay attacks are feasible. For this attack the adversary forwards the request of the reader to the victim and relays its answer to the reader in real time, pretending to be the owner of the victim's smart card. This is similar to a man-in-the-middle attack. One libnfc code example demonstrates a relay attack using two stock commercial NFC devices. This attack can be implemented using only two NFC-enabled mobile phones.

src: i.ytimg.com

Standards

NFC standards cover communications protocols and data exchange formats, and are based on existing RFID standards including ISO/IEC 14443 and FeliCa. The standards include ISO/IEC 18092 and those defined by the NFC Forum.

ISO / IEC

NFC is standardized in ECMA-340 and ISO/IEC 18092. These standards specify the modulation schemes, coding, transfer speeds and frame format of the RF interface of NFC devices, as well as initialization schemes and conditions required for data collision-control during initialization for both passive and active NFC modes. They also define the transport protocol, including protocol activation and data-exchange methods. The air interface for NFC is standardized in:

• ISO/IEC 18092 / ECMA-340--Near Field Communication Interface and Protocol-1 (NFCIP-1)
• ISO/IEC 21481 / ECMA-352--Near Field Communication Interface and Protocol-2 (NFCIP-2)

NFC incorporates a variety of existing standards including ISO/IEC 14443 Type A and Type B, and FeliCa. NFC-enabled phones work at a basic level with existing readers. In "card emulation mode" an NFC device should transmit, at a minimum, a unique ID number to a reader. In addition, NFC Forum defined a common data format called NFC Data Exchange Format (NDEF) that can store and transport items ranging from any MIME-typed object to ultra-short RTD-documents, such as URLs. The NFC Forum added the Simple NDEF Exchange Protocol (SNEP) to the spec that allows sending and receiving messages between two NFC devices.

GSMA

The GSM Association (GSMA) is a trade association representing nearly 800 mobile telephony operators and more than 200 product and service companies across 219 countries. Many of its members have led NFC trials and are preparing services for commercial launch.

GSM is involved with several initiatives:

• Standards: GSMA is developing certification and testing standards to ensure global interoperability of NFC services.
• Pay-Buy-Mobile initiative: Seeks to define a common global approach to using NFC technology to link mobile devices with payment and contactless systems.
• On November 17, 2010, after two years of discussions, AT&T, Verizon and T-Mobile launched a joint venture to develop a platform through which point of sale payments could be made using NFC in cell phones. Initially known as Isis Mobile Wallet and later as Softcard, the venture was designed to usher in broad deployment of NFC technology, allowing their customers' NFC-enabled cell phones to function similarly to credit cards throughout the US. Following an agreement with--and IP purchase by--Google, the Softcard payment system was shuttered in March, 2015, with an endorsement for its earlier rival, Google Wallet.

StoLPaN

StoLPaN ('Store Logistics and Payment with NFC') is a pan-European consortium supported by the European Commission's Information Society Technologies program. StoLPaN will examine the potential for NFC local wireless mobile communication.

NFC Forum

NFC Forum is a non-profit industry association formed on March 18, 2004, by NXP Semiconductors, Sony and Nokia to advance the use of NFC wireless interaction in consumer electronics, mobile devices and PCs. Standards include the four distinct tag types that provide different communication speeds and capabilities covering flexibility, memory, security, data retention and write endurance. NFC Forum promotes implementation and standardization of NFC technology to ensure interoperability between devices and services. As of June 2013, the NFC Forum had over 190 member companies.

NFC Forum promotes NFC and certifies device compliance and whether it fits in a personal area network.

Other standardization bodies

GSMA defined a platform for the deployment of GSMA NFC Standards within mobile handsets. GSMA's efforts include, Single Wire Protocol, testing and certification and secure element. The GSMA standards surrounding the deployment of NFC protocols (governed by NFC Forum) on mobile handsets are neither exclusive nor universally accepted. For example, Google's deployment of Host Card Emulation on Android KitKat provides for software control of a universal radio. In this HCE Deployment the NFC protocol is leveraged without the GSMA standards.

Other standardization bodies involved in NFC include:

• ETSI / SCP (Smart Card Platform) to specify the interface between the SIM card and the NFC chipset.
• GlobalPlatform to specify a multi-application architecture of the secure element.
• EMVCo for the impacts on the EMV payment applications

src: c8.alamy.com

Applications

NFC allows one- and two-way communication between endpoints, suitable for many applications.

Commerce

NFC devices can be used in contactless payment systems, similar to those used in credit cards and electronic ticket smartcards and allow mobile payment to replace/supplement these systems.

In Android 4.4, Google introduced platform support for secure NFC-based transactions through Host Card Emulation (HCE), for payments, loyalty programs, card access, transit passes and other custom services. HCE allows any Android 4.4 app to emulate an NFC smart card, letting users initiate transactions with their device. Apps can use a new Reader Mode to act as readers for HCE cards and other NFC-based transactions.

On September 9, 2014, Apple announced support for NFC-powered transactions as part of Apple Pay. With the introduction of iOS 11, Apple devices allow third-party developers to read data from NFC tags.

Bootstrapping other connections

NFC offers a low-speed connection with simple setup that can be used to bootstrap more capable wireless connections. For example, Android Beam software uses NFC to enable pairing and establish a Bluetooth connection when doing a file transfer and then disabling Bluetooth on both devices upon completion. Nokia, Samsung, BlackBerry and Sony have used NFC technology to pair Bluetooth headsets, media players and speakers with one tap. The same principle can be applied to the configuration of Wi-Fi networks. Samsung Galaxy devices have a feature named S-Beam--an extension of Android Beam that uses NFC (to share MAC Address and IP addresses) and then uses Wi-Fi Direct to share files and documents. The advantage of using Wi-Fi Direct over Bluetooth is that it permits much faster data transfers, running up to 300Mbit/s.

Social networking

NFC can be used for social networking, for sharing contacts, photos, videos or files and entering multiplayer mobile games.

Identity and access tokens

NFC-enabled devices can act as electronic identity documents and keycards. NFC's short range and encryption support make it more suitable than less private RFID systems.

Smartphone automation and NFC tags

NFC-equipped smartphones can be paired with NFC Tags or stickers that can be programmed by NFC apps. These programs can allow a change of phone settings, texting, app launching, or command execution.

Such apps do not rely on a company or manufacturer, but can be utilized immediately with an NFC-equipped smartphone and an NFC tag.

The NFC Forum published the Signature Record Type Definition (RTD) 2.0 in 2015 to add integrity and authenticity for NFC Tags. This specification allows an NFC device to verify tag data and identify the tag author.

Gaming

NFC was used in video games starting with Skylanders: Spyro's Adventure. With it you buy figurines that are customizable and contain personal data with each figure, so no two figures are exactly alike. The Wii U was the first system to include NFC technology out of the box via the GamePad. It was later included in the Nintendo 3DS range (being built into the New Nintendo 3DS/XL and in a separately sold reader which uses Infrared to communicate to the system). The Amiibo range of accessories utilizes NFC technology to unlock features.

src: sociable.co

Bluetooth comparison

NFC and Bluetooth are both relatively short-range communication technologies available on mobile phones. NFC operates at slower speeds than Bluetooth and has a much shorter range, but consumes far less power and doesn't require pairing.

NFC sets up more quickly than standard Bluetooth, but has a lower transfer rate than Bluetooth low energy. With NFC, instead of performing manual configurations to identify devices, the connection between two NFC devices is automatically established in less than .1 second. The maximum data transfer rate of NFC (424 kbit/s) is slower than that of Bluetooth V2.1 (2.1 Mbit/s).

NFC's maximum working distance of less than 20 cm reduces the likelihood of unwanted interception, making it particularly suitable for crowded areas that complicate correlating a signal with its transmitting physical device (and by extension, its user).

NFC is compatible with existing passive RFID (13.56 MHz ISO/IEC 18000-3) infrastructures. It requires comparatively low power, similar to the Bluetooth V4.0 low-energy protocol. When NFC works with an unpowered device (e.g. on a phone that may be turned off, a contactless smart credit card, a smart poster), however, the NFC power consumption is greater than that of Bluetooth V4.0 Low Energy, since illuminating the passive tag needs extra power.

src: www.businesskorea.co.kr

Devices

In 2011, handset vendors released more than 40 NFC-enabled handsets with the Android mobile operating system. The iPhone 6 line is the first set of handsets from Apple to support NFC. BlackBerry devices support NFC using BlackBerry Tag on devices running BlackBerry OS 7.0 and greater.

MasterCard added further NFC support for PayPass for the Android and BlackBerry platforms, enabling PayPass users to make payments using their Android or BlackBerry smartphones. A partnership between Samsung and Visa added a 'payWave' application on the Galaxy S4 smartphone.

Microsoft added native NFC functionality in their mobile OS with Windows Phone 8, as well as the Windows 8 operating system. Microsoft provides the "Wallet hub" in Windows Phone 8 for NFC payment, and can integrate multiple NFC payment services within a single application.

src: cdn.idplate.com

Deployments

As of April 2011, hundreds of NFC trials had been conducted. Some firms moved to full-scale service deployments, spanning one or more countries. Multi-country deployments include Orange's rollout of NFC technology to banks, retailers, transport, and service providers in multiple European countries, and Airtel Africa and Oberthur Technologies deploying to 15 countries throughout Africa.

• China telecom (China's 3rd largest mobile operator) made its NFC rollout in November 2013. The company signed up multiple banks to make their payment apps available on its SIM Cards. China telecom stated that the wallet would support coupons, membership cards, fuel cards and boarding passes. The company planned to achieve targets of rolling out 40 NFC phone models and 30 Mn NFC SIMs by 2014.
• Softcard (formerly Isis Mobile Wallet), a joint venture from Verizon Wireless, AT&T and T-Mobile, focuses on in-store payments making use of NFC technology. After doing pilots in some regions, they launched across the US.
• Vodafone launched the NFC-based Vodafone SmartPass mobile payment service in Spain in partnership with Visa. It enables consumers with an NFC-enabled mobile device to make contactless payments via their SmartPass credit balance at any POS.
• OTI, an Israeli company that designs and develops contactless microprocessor-based smart card technology, contracted to supply NFC-readers to one of its channel partners in the US. The partner was required to buy $10MM worth of OTI NFC readers over 3 years.
• Rogers Communications launched virtual wallet Suretap to enable users to make payments with their phone in Canada in April 2014. Suretap users can load up gift cards and pre-paid MasterCards from national retailers.
• Sri Lanka's first workforce smartcard, uses NFC.
• As of December 13, 2013 Tim Hortons TimmyME BlackBerry 10 Application allowed users to link their prepaid Tim Card to the app, allowing payment by tapping the NFC-enabled device to a standard contactless terminal.
• Google Wallet allows consumers to store credit card and store loyalty card information in a virtual wallet and then use an NFC-enabled device at terminals that also accept MasterCard PayPass transactions.
• Germany, Austria, Finland, New Zealand, Italy, Iran, and Turkey trialed NFC ticketing systems for public transport. The Lithuanian capital of Vilnius fully replaced paper tickets for public transportation with ISO/IEC 14443 Type A cards on July 1, 2013.
• NFC sticker-based payments in Australia's Bankmecu and card issuer Cuscal completed an NFC payment sticker trial, enabling consumers to make contactless payments at Visa payWave terminals using a smart sticker stuck to their phone.
• India was implementing NFC-based transactions in box offices for ticketing purposes.
• A partnership of Google and Equity Bank in Kenya introduced NFC payment systems for public transport in the Capital city Nairobi under the branding "Beba Pay".

src: www.synchrotech.com

See also

src: mms.businesswire.com

Notes

src: thumbs.dreamstime.com

References

Source of article : Wikipedia